Revisión en video del modelo
Nuestro servicio y atención al cliente
At the same time, they can be used to identify the dosage form. Additionally, some physical properties of the coating, such as moisture resistance, can be improved with dyes. Dyes can be classified into water-soluble dyes and insoluble pigments.
Water-soluble dyes cannot be used in film coatings based on organic solvents, they can only be used in coatings based on aqueous compositions. Pigments are preferred because: they are less likely to affect bioavailability than some water-soluble colorants; they help reduce the water permeability of the coating; and they can be used as fillers to increase the total solid content of the coating dispersion without undesirable increases in viscosity. Solvents. Solvents for film coatings may include: alcohols, ketones, esters, chlorinated hydrocarbons and water. Solvents have an important function in the coating formation process as they help in coating the core surface. A good interaction between the solvent and the polymer is necessary to ensure optimum film properties when the coating dries. This initial interaction between solvent and polymer will maximize the elongation of the polymer chain, which in turn will provide good cohesive strength and thus the best mechanical properties. At the same time, an important function of the solvent system is to provide a controlled distribution of the polymer on the core surface to create a homogeneous coating.
Glosario Farmacéutico
Especificaciones técnicas
Studies have shown that when the HPMC content in the blend is less than 24%, the release profile depends on the rate of water penetration into the coating, which in turn becomes a determining factor in selecting the ratio of polymer concentrations in the blend.
Most of the polymers used are available in a wide range of molecular weights, which is a major factor in the choice of coating technology. Molecular weight can have a significant effect on coating properties such as viscosity, mechanical strength, and film elasticity.
Plasticizers. A plasticizer is a liquid or solid with a high boiling point. Examples of plasticizers include glycerin, propylene glycol, polyethylene glycol, triacetin, esters of citric acid (e.g., triethyl citrate), esters of phthalic acid (e.g., triethyl phthalate). The introduction of a plasticizer can improve the elasticity of the coating Cracking the risk of mechanical damage and potentially in the coating improve the adhesion of the film coating to the core.
When the plasticizer interacts with the polymer, the minimum film formation temperature may be reduced. To form a quality film, the plasticizer must have high compatibility with the polymer and be permanently retained in the coating, especially if the main objective of the coating is the stability of the dosage form during storage.
Información adicional
The scientific literature provides numerous examples of the effect of plasticizer concentration on the physicochemical properties of the film coating and on the release of the drug substance from the coated products. For example, high plasticizer content can reduce the release of metoprolol from Eudragit RS coated microspheres and improve the release stability of theophylline from coated microspheres during storage.
Moreover, the release rate of the drug substance has been shown to be influenced by the type of plasticizer. For example, the release of propanolol from microspheres coated with a mixture of ethylcellulose and Eudragit L100-55 is faster when using the hydrophilic plasticizer triethyl citrate than when using the hydrophobic dibutyl sebacinate. Other studies have shown that the plasticizer can leach out of the coating during dissolution, thus affecting both mechanical properties and the release of LVs.
Adhesion of coating substances during film application causes the formation of undesirable aggregates, and the resulting coatings may be damaged when attempts are made to separate adhering parts. This effect can be neutralized by adding anti-adhesion agents to the coating composition or by applying these agents immediately after the spray chamber. Useful anti-adhesion agents include talc, magnesium stearate, kaolin, etc.
Dyes. Dyes are commonly used to improve the appearance of the dosage form.
Seguimiento del estado del pedido
Buenas tardes, por favor confirme que mañana hasta las 15:30 recibiremos nuestro envío en Bilbao? Póngase en contacto con la empresa de transporte. 18/05/2024 03:55
¡Hola James ! Los representantes de la empresa de transporte sobre el estado de entrega de su envío dijeron que estará en Bilbao en unos días. Por favor, espéralo. 18/05/2024 03:55
Contrato #12, el plazo de entrega ya pasó. Actúe por fin. Acelerar Tsibulsky R. G. 18/05/2024 04:05
Hola Samuel, estamos de vacaciones los fines de semana y no podemos responder mensajes. Eleve el contrato, el tiempo de entrega del equipo a su almacén en A Coruña a 50 días hábiles (no calendario). Acción tomada. 18/05/2024 04:09
Buenas tardes, recibimos el dispensador de polvo PR-15 en viales de plástico, programado Por la tarde para abrir la caja y realizar la prueba. 18/05/2024 04:15
Aurora, Buenas tardes. Buenas noticias, envíe un informe de fotos y videos a WhatsApp +79853643808. 18/05/2024 04:18
¿Puede venir su técnico a Ourense? Necesitamos consulta y asistencia de tecnólogos. 18/05/2024 04:25
Evelyn, Ya hemos recibido su correo electrónico. Un técnico antes del almuerzo se pondrá en contacto con usted. No te preocupes. 18/05/2024 04:28
¡Hola Roman! Gracias por el servicio y la calidad de sus productos. ¡Estamos muy contentos y satisfechos con la compra! 18/05/2024 04:35
Hola Hannah, Aparentemente ha probado su secador liofílico al vacío LZY-01. Su calidad está por encima de la media, funcionará. Estamos esperando sus nuevas solicitudes. 18/05/2024 04:39
¡Buenas tardes, espero {tiempo} para llevar la Prensa de tabletas UNIT 600A a Mexicali ! Por favor comente. 18/05/2024 04:45
¡Buenos días, Hazel! Nuestro gerente se ha comunicado con el servicio de entrega, el equipo se entregará en Mexicali en su domicilio. Por favor, háganos saber cuando lo reciba. 18/05/2024 04:47
Prensa rotativa de tabletas RZK-25 Quiero hacer un pedido con entrega en Berlín 18/05/2024 04:55
Buenos días, Scarlett Hemos verificado la información de su solicitud, lamentablemente la fábrica ha detenido la producción de este modelo de equipo. Envíe al correo una descripción de su tarea o comuníquese con su gerente. Ayudaremos en cualquier caso con la elección. 18/05/2024 04:58
¿Te acuerdas de mí? Hay una entrega en el Elche 18/05/2024 05:05
Victoria, ¡Hola! Recordamos a todos nuestros clientes. su máquina de llenado de miel para ampollas modelo MN-82 será pasado mañana en Elche . 18/05/2024 05:08
Esperando la entrega a Culiacán de una máquina pulidora de cápsulas de gelatina dura TR-02. ¿Qué hay de eso? 18/05/2024 05:15
Hola Aria, en su pedido le informamos que por la mañana el conductor se comunicará con usted para aclarar la hora y el lugar de descarga. 18/05/2024 05:18
Transportador de polvo al vacío QV-01 cantidad de 3 piezas, necesita descuento y entrega a Pontevedra. 18/05/2024 05:25
Buen día Skylar, en nuestro catálogo se dan todos los precios incluida la entrega en la puerta del cliente. Si compras 3 piezas te haremos un descuento del 7%. La entrega a Pontevedra está incluida en el precio. 18/05/2024 05:25
- EQUIPO DE SECADO POR PULVERIZACIÓN PARA SUSPENSIONES
- EQUIPO PARA LA PRODUCCIÓN DE TABLETAS
- EQUIPO PARA ENVASAR POLVOS EN VIALES
- EQUIPO PARA RECUBRIMIENTO DE TABLETAS
- EQUIPO PARA CONTAR Y ENVASAR COMPRIMIDOS Y CÁPSULAS EN FRASCOS
- EQUIPO PARA LLENADO DE CREMAS Y SELLADO DE TUBOS DE PLÁSTICO
- EQUIPO DE LLENADO Y TAPADO DE BOTELLAS
- EQUIPO AUTOMÁTICO PARA EXTRAER COMPRIMIDOS Y CÁPSULAS DE BLÍSTERES.
- EQUIPO PARA LLENAR CÁPSULAS DE GELATINA DURA CON POLVO
- MÁQUINAS PARA LA PRODUCCIÓN DE SUPOSITORIOS
- EQUIPO PARA IMPRIMIR LOGOTIPOS EN TABLETAS Y CÁPSULAS.
- MÁQUINAS PARA FORMAR Y LLENAR AMPOLLAS DE PLÁSTICO
- MÁQUINAS DOSIFICADORAS DE ALTA PRECISIÓN MÁQUINAS DE LLENADO DE POLVO
- EQUIPO PARA LAVAR Y ESTERILIZAR BIBERONES
- EQUIPO PARA EL ENVASADO DE COMPRIMIDOS Y CÁPSULAS EN BOTELLAS DE PLÁSTICO
- EQUIPO PARA LLENADO Y SELLADO DE AMPOLLAS DE VIDRIO
- EQUIPO PARA PULIR Y DESEMPOLVAR TABLETAS Y CÁPSULAS
- EQUIPO PARA HOMOGENEIZAR CREMAS Y UNGÜENTOS
- CENTRIFUGADORAS FARMACÉUTICAS AUTOMÁTICAS
- EQUIPO PARA ALIMENTACIÓN POR TORNILLO DE POLVOS
- EQUIPO DE GRANULACIÓN DE POLVO
- EQUIPO PARA TRANSPORTE DE POLVOS AL VACÍO
- EQUIPO PARA LA MEZCLA EFICIENTE DE POLVOS
- EQUIPO PARA ALIMENTACIÓN AUTOMÁTICA CON BIBERÓN PARA LÍNEAS DE LLENADO
- EQUIPOS PARA ENVASADO AL VACÍO EN BOLSAS DE PLÁSTICO
- EQUIPOS PARA EL ENVASADO DE COMPRIMIDOS EN TIRAS Y TUBOS
- EQUIPO PARA DETECTOR DE METALES EN CÁPSULAS Y TABLETAS DE GELATINA
- EQUIPO PARA EMPACAR TÉ EN BOLSITAS DE TÉ CON HILO Y ETIQUETA.
- EQUIPO PARA CONTROL DE PESO Y CLASIFICACIÓN DE CAJAS DE CARTÓN CON MEDICAMENTOS
- EQUIPO PARA EL LLENADO Y ENVASADO DE TINTURAS DE HIERBAS
- EQUIPO PARA SELLADO POR INDUCCIÓN DE BOTELLAS DE ALUMINIO
- EQUIPOS PARA EL ENVASADO DE PRODUCTOS ALIMENTICIOS EN ENVASES DOY-PACK
- EQUIPOS PARA LLENADO DE LÍQUIDOS EN BARRILES DE PLÁSTICO Y METAL.
- EQUIPO AUTOMÁTICO PARA ETIQUETAS AUTOADHESIVAS EN ENVASES
- MÁQUINAS DE ENVASADO FLOW-PACK
- EQUIPOS PARA EL ENVASADO DE MATERIALES A GRANEL EN BOLSAS DE PLÁSTICO
- EQUIPO PARA ENVOLVER CAJAS DE CARTÓN CON CELOFÁN
- EQUIPO PARA ENVASAR PRODUCTOS EN UN FLOW PACK
- EQUIPO AUTOMÁTICO PARA ENVASADO EN BLÍSTER
- EQUIPO PARA LA FABRICACIÓN Y ENVASADO DE TOALLITAS HÚMEDAS CON ALCOHOL
- EQUIPO PARA APLICAR LA FECHA DE CADUCIDAD Y EL NÚMERO DE LOTE A LOS PRODUCTOS.
- EQUIPO SEMIAUTOMÁTICO PARA EL LLENADO DE CÁPSULAS DE GELATINA
- DISPENSADORES DE BOMBAS PERISTÁLTICAS
- MÁQUINAS QUE IMPRIMEN FECHA DE CADUCIDAD Y NÚMERO DE LOTE
- EQUIPO PARA PRUEBAS DE LABORATORIO DE MEDICAMENTOS
- EQUIPO PARA MEZCLAR LÍQUIDOS CON CALENTAMIENTO POR MICROONDAS
- EQUIPO MANUAL PARA LLENAR CÁPSULAS DE GELATINA CON POLVO.
- EQUIPO PARA DOSIFICACIÓN AUTOMÁTICA DE CREMAS Y UNGÜENTOS
- EQUIPO PARA PULVERIZAR MATERIAS PRIMAS FARMACÉUTICAS
- EQUIPO PARA LA PRODUCCIÓN DE BOILIES DE PESCA
- EQUIPO DE SOBREMESA PARA MEZCLAR POLVOS
- EQUIPO SEMIAUTOMÁTICO PARA ENVASADO DE BLÍSTERES
- EQUIPOS DE SOBREMESA PARA DOSIFICACIÓN DE LÍQUIDOS
- EQUIPO DE SOBREMESA PARA LA PRODUCCIÓN DE EMULSIONES A ALTA VELOCIDAD
- EQUIPO PARA TAMIZADO VIBRATORIO DE POLVOS
- EQUIPO PARA ENVASAR POLVOS EN VIALES
- EQUIPO PARA RECUBRIMIENTO DE TABLETAS
- EQUIPO PARA LLENADO Y SELLADO DE AMPOLLAS DE VIDRIO
- EQUIPO DE SECADO POR PULVERIZACIÓN PARA SUSPENSIONES
- EQUIPO AUTOMÁTICO PARA EXTRAER COMPRIMIDOS Y CÁPSULAS DE BLÍSTERES.
- EQUIPO PARA CONTAR Y ENVASAR COMPRIMIDOS Y CÁPSULAS EN FRASCOS
- EQUIPO DE LLENADO Y TAPADO DE BOTELLAS
- EQUIPO PARA LA PRODUCCIÓN DE TABLETAS
- EQUIPO PARA LLENADO DE CREMAS Y SELLADO DE TUBOS DE PLÁSTICO
- EQUIPO PARA EL ENVASADO DE COMPRIMIDOS Y CÁPSULAS EN BOTELLAS DE PLÁSTICO
- EQUIPO PARA LLENAR CÁPSULAS DE GELATINA DURA CON POLVO
- MÁQUINAS PARA LA PRODUCCIÓN DE SUPOSITORIOS
- EQUIPO PARA IMPRIMIR LOGOTIPOS EN TABLETAS Y CÁPSULAS.
- MÁQUINAS PARA FORMAR Y LLENAR AMPOLLAS DE PLÁSTICO
- EQUIPO PARA LAVAR Y ESTERILIZAR BIBERONES
- EQUIPO PARA PULIR Y DESEMPOLVAR TABLETAS Y CÁPSULAS
- MÁQUINAS DOSIFICADORAS DE ALTA PRECISIÓN MÁQUINAS DE LLENADO DE POLVO
- EQUIPO PARA TRANSPORTE DE POLVOS AL VACÍO
- EQUIPO PARA LA MEZCLA EFICIENTE DE POLVOS
- CENTRIFUGADORAS FARMACÉUTICAS AUTOMÁTICAS
- EQUIPO DE GRANULACIÓN DE POLVO
- EQUIPO PARA HOMOGENEIZAR CREMAS Y UNGÜENTOS
- EQUIPO PARA ALIMENTACIÓN AUTOMÁTICA CON BIBERÓN PARA LÍNEAS DE LLENADO
- EQUIPO PARA ALIMENTACIÓN POR TORNILLO DE POLVOS
- EQUIPO PARA APLICAR LA FECHA DE CADUCIDAD Y EL NÚMERO DE LOTE A LOS PRODUCTOS.
- EQUIPOS PARA EL ENVASADO DE PRODUCTOS ALIMENTICIOS EN ENVASES DOY-PACK
- EQUIPOS PARA LLENADO DE LÍQUIDOS EN BARRILES DE PLÁSTICO Y METAL.
- EQUIPO PARA ENVOLVER CAJAS DE CARTÓN CON CELOFÁN
- EQUIPO AUTOMÁTICO PARA ETIQUETAS AUTOADHESIVAS EN ENVASES
- EQUIPO AUTOMÁTICO PARA ENVASADO EN BLÍSTER
- EQUIPO PARA LA FABRICACIÓN Y ENVASADO DE TOALLITAS HÚMEDAS CON ALCOHOL
- EQUIPO PARA EL LLENADO Y ENVASADO DE TINTURAS DE HIERBAS
- EQUIPO PARA EMPACAR TÉ EN BOLSITAS DE TÉ CON HILO Y ETIQUETA.
- MÁQUINAS DE ENVASADO FLOW-PACK
- EQUIPOS PARA ENVASADO AL VACÍO EN BOLSAS DE PLÁSTICO
- EQUIPOS PARA EL ENVASADO DE MATERIALES A GRANEL EN BOLSAS DE PLÁSTICO
- EQUIPO PARA ENVASAR PRODUCTOS EN UN FLOW PACK
- EQUIPOS PARA EL ENVASADO DE COMPRIMIDOS EN TIRAS Y TUBOS
- EQUIPO PARA SELLADO POR INDUCCIÓN DE BOTELLAS DE ALUMINIO
- EQUIPO PARA CONTROL DE PESO Y CLASIFICACIÓN DE CAJAS DE CARTÓN CON MEDICAMENTOS
- EQUIPO PARA DETECTOR DE METALES EN CÁPSULAS Y TABLETAS DE GELATINA
- EQUIPO PARA PRUEBAS DE LABORATORIO DE MEDICAMENTOS
- MÁQUINAS QUE IMPRIMEN FECHA DE CADUCIDAD Y NÚMERO DE LOTE
- EQUIPO PARA DOSIFICACIÓN AUTOMÁTICA DE CREMAS Y UNGÜENTOS
- EQUIPO SEMIAUTOMÁTICO PARA ENVASADO DE BLÍSTERES
- DISPENSADORES DE BOMBAS PERISTÁLTICAS
- EQUIPO DE SOBREMESA PARA MEZCLAR POLVOS
- EQUIPO PARA MEZCLAR LÍQUIDOS CON CALENTAMIENTO POR MICROONDAS
- EQUIPO PARA LA PRODUCCIÓN DE BOILIES DE PESCA
- EQUIPOS DE SOBREMESA PARA DOSIFICACIÓN DE LÍQUIDOS
- EQUIPO PARA TAMIZADO VIBRATORIO DE POLVOS
- EQUIPO DE SOBREMESA PARA LA PRODUCCIÓN DE EMULSIONES A ALTA VELOCIDAD
- EQUIPO MANUAL PARA LLENAR CÁPSULAS DE GELATINA CON POLVO.
- EQUIPO SEMIAUTOMÁTICO PARA EL LLENADO DE CÁPSULAS DE GELATINA
- EQUIPO PARA PULVERIZAR MATERIAS PRIMAS FARMACÉUTICAS