Revisión en video del modelo
Nuestro servicio y atención al cliente
The image of the object surface topography is visually observed on the monitor screen and recorded on large-format photographic film. The principle of operation of the electron scanning microscope is as follows: a narrow beam of electrons with kinetic energy of the order of 1-25 kV falls on the sample under study. Electrons of the reflected beam (secondary electrons), released by atoms on the surface, form an image that is registered on the screen or microphotograph. In order to avoid sample damage or combustion, the sample is pre-coated with a conductive layer (usually a thin layer of gold) to prevent charging of the surface. The method of electron scanning microscopy allows to determine with high resolution the structure of the studied samples, shape and size of particles, pore size, pore size distribution, surface porosity and visualize pore geometry.
Glosario Farmacéutico
Especificaciones técnicas
This once again proves the fact that the finer the particles, the lower the friability.
The above-described technological characteristics of powdered drug substances are of paramount importance in the development of composition and technology of tablet forms, which should provide the necessary bioavailability and, accordingly, the effectiveness and safety of the drug.
Technological characteristics of powders are established quickly enough, methods of their determination are simple and do not cause difficulties, therefore these methods are now widely used in the pharmaceutical industry for mass control of all incoming drug substances.
Información adicional
As a rule, pharmaceutical companies analyze the dispersibility of drug substances by such available methods as sieve analysis, microscopy, using a laser particle analyzer, etc. This allows already at the stage of selection of firms-suppliers of drug substances to exclude non-standard substances in the developed technological process and ensure high quality of domestic tablet preparations. The method of electron scanning microscopy can be used to determine such properties as surface, shape and size of particles. Stationary electron scanning microscope designed to study the topography (microgeometry) of the surface of a solid body by secondary electron emission.
Seguimiento del estado del pedido
Somos de Nueva Jersey, pagamos el equipo en su factura de ayer. ¿Se ha recibido el pago? ¿Cuánto tiempo tardará en entregarnos? 16/05/2024 13:48
Lily, hola. El pago se acredita en nuestra cuenta de liquidación. Plazo de fabricación de su equipo por fábrica 20 días hábiles, entrega desde fábrica a nuestro almacén en EE. UU. 1 mes, entrega desde el almacén en Manresa 15 días calendario. 16/05/2024 13:49
LB-205 estado de entrega de la máquina envasadora automática horizontal de toallitas húmedas con alcohol... gracias 16/05/2024 13:58
Hola Ellie, es demasiado pronto para comprobar el estado de tu pedido. En 30 días solo se completará la parte de producción. 16/05/2024 14:02
Buenas tardes, recibimos el dispensador de polvo PR-15 en viales de plástico, programado según lo estipulado en el contrato para abrir la caja y realizar la prueba. 16/05/2024 14:08
Isabella, Buenas tardes. Buenas noticias, envíe un WhatsApp al +79853643808 para enviar un informe de fotos y videos. 16/05/2024 14:12
Dime, ¿se fue la máquina automática de cápsulas NJ-120 ? 16/05/2024 14:18
Hannah, buenas tardes. Sí, ya pasado mañana lo recibirás. Teniendo en cuenta el gran peso del equipo, le pedimos que se encargue de la descarga con carretilla elevadora con anticipación. La empresa de transporte no proporciona descarga. Solo entrega a la dirección. 16/05/2024 14:20
Querido Roman. Fecha límite (time) Estoy esperando su presupuesto para una máquina para extraer tabletas y cápsulas de los blísteres MB-10 con entrega. 16/05/2024 14:28
Hola Charlotte, A la hora especificada le enviaremos la oferta a su correo electrónico. Ahora estamos esperando una respuesta de la empresa de transporte sobre el tiempo de entrega a Estepona . 16/05/2024 14:29
Prensa rotativa de tabletas RZK-25 Quiero hacer un pedido con entrega en Berlín 16/05/2024 14:38
Buenos días, Mia Hemos verificado la información de su solicitud, lamentablemente la fábrica ha detenido la producción de este modelo de equipo. Envíe al correo una descripción de su tarea o comuníquese con su gerente. Ayudaremos en cualquier caso con la elección. 16/05/2024 14:42
La máquina de llenado de líquidos BB-152 llegó de usted hoy, ¿nos recuerda? ¿Dónde está el papeleo? 16/05/2024 14:48
Los documentos de envío originales se entregarán en Pamplona mañana hasta las 12:30. Por favor, envíenos las copias firmadas. 16/05/2024 14:52
Buen día, quiero según lo estipulado en el contrato para obtener la máquina de llenado de tabletas y cápsulas FF-02 en Salamanca? 16/05/2024 14:58
Buenas tardes, Maya! Nos hemos puesto en contacto con la empresa de transporte, su envío está llegando a Salamanca sin demora. Espere la llamada de un representante de Business Lines. 16/05/2024 14:59
LB-205 estado de entrega de la máquina envasadora automática horizontal de toallitas húmedas con alcohol... gracias 16/05/2024 15:08
Hola Owen, es demasiado pronto para comprobar el estado de tu pedido. En 30 días solo se completará la parte de producción. 16/05/2024 15:09
Dime, ¿se fue la máquina automática de cápsulas NJ-120 ? 16/05/2024 15:18
Muhammad, buenas tardes. Sí, ya mañana hasta las 12:30 lo recibirás. Teniendo en cuenta el gran peso del equipo, le pedimos que se encargue de la descarga con carretilla elevadora con anticipación. La empresa de transporte no proporciona descarga. Solo entrega a la dirección. 16/05/2024 15:21
- EQUIPO PARA LLENADO Y SELLADO DE AMPOLLAS DE VIDRIO
- EQUIPO PARA RECUBRIMIENTO DE TABLETAS
- EQUIPO PARA LLENADO DE CREMAS Y SELLADO DE TUBOS DE PLÁSTICO
- EQUIPO PARA CONTAR Y ENVASAR COMPRIMIDOS Y CÁPSULAS EN FRASCOS
- EQUIPO PARA PULIR Y DESEMPOLVAR TABLETAS Y CÁPSULAS
- EQUIPO PARA LA PRODUCCIÓN DE TABLETAS
- MÁQUINAS PARA LA PRODUCCIÓN DE SUPOSITORIOS
- EQUIPO DE SECADO POR PULVERIZACIÓN PARA SUSPENSIONES
- EQUIPO PARA LAVAR Y ESTERILIZAR BIBERONES
- EQUIPO PARA IMPRIMIR LOGOTIPOS EN TABLETAS Y CÁPSULAS.
- EQUIPO DE LLENADO Y TAPADO DE BOTELLAS
- EQUIPO AUTOMÁTICO PARA EXTRAER COMPRIMIDOS Y CÁPSULAS DE BLÍSTERES.
- MÁQUINAS DOSIFICADORAS DE ALTA PRECISIÓN MÁQUINAS DE LLENADO DE POLVO
- EQUIPO PARA EL ENVASADO DE COMPRIMIDOS Y CÁPSULAS EN BOTELLAS DE PLÁSTICO
- MÁQUINAS PARA FORMAR Y LLENAR AMPOLLAS DE PLÁSTICO
- EQUIPO PARA LLENAR CÁPSULAS DE GELATINA DURA CON POLVO
- EQUIPO PARA ENVASAR POLVOS EN VIALES
- EQUIPO PARA LA MEZCLA EFICIENTE DE POLVOS
- EQUIPO DE GRANULACIÓN DE POLVO
- EQUIPO PARA HOMOGENEIZAR CREMAS Y UNGÜENTOS
- EQUIPO PARA ALIMENTACIÓN AUTOMÁTICA CON BIBERÓN PARA LÍNEAS DE LLENADO
- CENTRIFUGADORAS FARMACÉUTICAS AUTOMÁTICAS
- EQUIPO PARA TRANSPORTE DE POLVOS AL VACÍO
- EQUIPO PARA ALIMENTACIÓN POR TORNILLO DE POLVOS
- MÁQUINAS DE ENVASADO FLOW-PACK
- EQUIPO PARA CONTROL DE PESO Y CLASIFICACIÓN DE CAJAS DE CARTÓN CON MEDICAMENTOS
- EQUIPO PARA EMPACAR TÉ EN BOLSITAS DE TÉ CON HILO Y ETIQUETA.
- EQUIPO PARA ENVASAR PRODUCTOS EN UN FLOW PACK
- EQUIPO PARA ENVOLVER CAJAS DE CARTÓN CON CELOFÁN
- EQUIPOS PARA ENVASADO AL VACÍO EN BOLSAS DE PLÁSTICO
- EQUIPOS PARA EL ENVASADO DE MATERIALES A GRANEL EN BOLSAS DE PLÁSTICO
- EQUIPO PARA EL LLENADO Y ENVASADO DE TINTURAS DE HIERBAS
- EQUIPO PARA APLICAR LA FECHA DE CADUCIDAD Y EL NÚMERO DE LOTE A LOS PRODUCTOS.
- EQUIPO PARA DETECTOR DE METALES EN CÁPSULAS Y TABLETAS DE GELATINA
- EQUIPO AUTOMÁTICO PARA ENVASADO EN BLÍSTER
- EQUIPOS PARA LLENADO DE LÍQUIDOS EN BARRILES DE PLÁSTICO Y METAL.
- EQUIPO PARA SELLADO POR INDUCCIÓN DE BOTELLAS DE ALUMINIO
- EQUIPOS PARA EL ENVASADO DE COMPRIMIDOS EN TIRAS Y TUBOS
- EQUIPO AUTOMÁTICO PARA ETIQUETAS AUTOADHESIVAS EN ENVASES
- EQUIPO PARA LA FABRICACIÓN Y ENVASADO DE TOALLITAS HÚMEDAS CON ALCOHOL
- EQUIPOS PARA EL ENVASADO DE PRODUCTOS ALIMENTICIOS EN ENVASES DOY-PACK
- EQUIPO PARA MEZCLAR LÍQUIDOS CON CALENTAMIENTO POR MICROONDAS
- EQUIPO PARA PULVERIZAR MATERIAS PRIMAS FARMACÉUTICAS
- DISPENSADORES DE BOMBAS PERISTÁLTICAS
- EQUIPO PARA DOSIFICACIÓN AUTOMÁTICA DE CREMAS Y UNGÜENTOS
- EQUIPO SEMIAUTOMÁTICO PARA ENVASADO DE BLÍSTERES
- EQUIPO DE SOBREMESA PARA LA PRODUCCIÓN DE EMULSIONES A ALTA VELOCIDAD
- EQUIPO PARA LA PRODUCCIÓN DE BOILIES DE PESCA
- EQUIPO MANUAL PARA LLENAR CÁPSULAS DE GELATINA CON POLVO.
- MÁQUINAS QUE IMPRIMEN FECHA DE CADUCIDAD Y NÚMERO DE LOTE
- EQUIPO PARA TAMIZADO VIBRATORIO DE POLVOS
- EQUIPO PARA PRUEBAS DE LABORATORIO DE MEDICAMENTOS
- EQUIPOS DE SOBREMESA PARA DOSIFICACIÓN DE LÍQUIDOS
- EQUIPO SEMIAUTOMÁTICO PARA EL LLENADO DE CÁPSULAS DE GELATINA
- EQUIPO DE SOBREMESA PARA MEZCLAR POLVOS
- EQUIPO PARA LAVAR Y ESTERILIZAR BIBERONES
- EQUIPO DE SECADO POR PULVERIZACIÓN PARA SUSPENSIONES
- MÁQUINAS PARA LA PRODUCCIÓN DE SUPOSITORIOS
- MÁQUINAS PARA FORMAR Y LLENAR AMPOLLAS DE PLÁSTICO
- EQUIPO AUTOMÁTICO PARA EXTRAER COMPRIMIDOS Y CÁPSULAS DE BLÍSTERES.
- MÁQUINAS DOSIFICADORAS DE ALTA PRECISIÓN MÁQUINAS DE LLENADO DE POLVO
- EQUIPO PARA EL ENVASADO DE COMPRIMIDOS Y CÁPSULAS EN BOTELLAS DE PLÁSTICO
- EQUIPO PARA RECUBRIMIENTO DE TABLETAS
- EQUIPO PARA LLENADO Y SELLADO DE AMPOLLAS DE VIDRIO
- EQUIPO PARA CONTAR Y ENVASAR COMPRIMIDOS Y CÁPSULAS EN FRASCOS
- EQUIPO PARA IMPRIMIR LOGOTIPOS EN TABLETAS Y CÁPSULAS.
- EQUIPO PARA LLENADO DE CREMAS Y SELLADO DE TUBOS DE PLÁSTICO
- EQUIPO PARA LLENAR CÁPSULAS DE GELATINA DURA CON POLVO
- EQUIPO DE LLENADO Y TAPADO DE BOTELLAS
- EQUIPO PARA PULIR Y DESEMPOLVAR TABLETAS Y CÁPSULAS
- EQUIPO PARA ENVASAR POLVOS EN VIALES
- EQUIPO PARA LA PRODUCCIÓN DE TABLETAS
- EQUIPO PARA ALIMENTACIÓN AUTOMÁTICA CON BIBERÓN PARA LÍNEAS DE LLENADO
- EQUIPO PARA LA MEZCLA EFICIENTE DE POLVOS
- EQUIPO PARA TRANSPORTE DE POLVOS AL VACÍO
- CENTRIFUGADORAS FARMACÉUTICAS AUTOMÁTICAS
- EQUIPO PARA HOMOGENEIZAR CREMAS Y UNGÜENTOS
- EQUIPO PARA ALIMENTACIÓN POR TORNILLO DE POLVOS
- EQUIPO DE GRANULACIÓN DE POLVO
- EQUIPO PARA ENVASAR PRODUCTOS EN UN FLOW PACK
- EQUIPO AUTOMÁTICO PARA ETIQUETAS AUTOADHESIVAS EN ENVASES
- MÁQUINAS DE ENVASADO FLOW-PACK
- EQUIPO PARA EL LLENADO Y ENVASADO DE TINTURAS DE HIERBAS
- EQUIPO PARA SELLADO POR INDUCCIÓN DE BOTELLAS DE ALUMINIO
- EQUIPO AUTOMÁTICO PARA ENVASADO EN BLÍSTER
- EQUIPO PARA ENVOLVER CAJAS DE CARTÓN CON CELOFÁN
- EQUIPO PARA EMPACAR TÉ EN BOLSITAS DE TÉ CON HILO Y ETIQUETA.
- EQUIPO PARA DETECTOR DE METALES EN CÁPSULAS Y TABLETAS DE GELATINA
- EQUIPOS PARA EL ENVASADO DE COMPRIMIDOS EN TIRAS Y TUBOS
- EQUIPO PARA LA FABRICACIÓN Y ENVASADO DE TOALLITAS HÚMEDAS CON ALCOHOL
- EQUIPOS PARA EL ENVASADO DE MATERIALES A GRANEL EN BOLSAS DE PLÁSTICO
- EQUIPO PARA APLICAR LA FECHA DE CADUCIDAD Y EL NÚMERO DE LOTE A LOS PRODUCTOS.
- EQUIPOS PARA ENVASADO AL VACÍO EN BOLSAS DE PLÁSTICO
- EQUIPO PARA CONTROL DE PESO Y CLASIFICACIÓN DE CAJAS DE CARTÓN CON MEDICAMENTOS
- EQUIPOS PARA LLENADO DE LÍQUIDOS EN BARRILES DE PLÁSTICO Y METAL.
- EQUIPOS PARA EL ENVASADO DE PRODUCTOS ALIMENTICIOS EN ENVASES DOY-PACK
- EQUIPO DE SOBREMESA PARA LA PRODUCCIÓN DE EMULSIONES A ALTA VELOCIDAD
- EQUIPO PARA PULVERIZAR MATERIAS PRIMAS FARMACÉUTICAS
- MÁQUINAS QUE IMPRIMEN FECHA DE CADUCIDAD Y NÚMERO DE LOTE
- EQUIPO MANUAL PARA LLENAR CÁPSULAS DE GELATINA CON POLVO.
- DISPENSADORES DE BOMBAS PERISTÁLTICAS
- EQUIPO SEMIAUTOMÁTICO PARA EL LLENADO DE CÁPSULAS DE GELATINA
- EQUIPO PARA TAMIZADO VIBRATORIO DE POLVOS
- EQUIPO PARA DOSIFICACIÓN AUTOMÁTICA DE CREMAS Y UNGÜENTOS
- EQUIPO DE SOBREMESA PARA MEZCLAR POLVOS
- EQUIPO PARA PRUEBAS DE LABORATORIO DE MEDICAMENTOS
- EQUIPO SEMIAUTOMÁTICO PARA ENVASADO DE BLÍSTERES
- EQUIPO PARA LA PRODUCCIÓN DE BOILIES DE PESCA
- EQUIPO PARA MEZCLAR LÍQUIDOS CON CALENTAMIENTO POR MICROONDAS
- EQUIPOS DE SOBREMESA PARA DOSIFICACIÓN DE LÍQUIDOS